Additel 875-660 Dry Well Calibrator Range 33 to 660 °C

¡Pero no nos detenemos ahí! La opción del Calibrador de Procesos agrega las capacidades de un termómetro de tres canales y un calibrador de procesos con funciones de documentación. También hemos incorporado una opción única para seleccionar su propio rango de temperatura dentro del rango del modelo elegido. Llamamos a esto la opción CYOR o opción de Elegir su Propio Rango. Cuando adquieres la opción CYOR, seleccionas el rango de temperatura superior e inferior necesario, y nosotros calibramos y optimizamos el rendimiento del pozo seco en tu rango seleccionado. Cada unidad cuenta con una pantalla táctil a color, control de doble zona y muchas otras características. ¡Seguro que te encantarán estos nuevos pozos secos!

 

Opción de Calibrador de Procesos

 

Cada modelo ofrece una opción de Calibrador de Procesos (PC). Esta opción de calibrador de procesos combina las numerosas características que se encuentran en un calibrador de procesos documentado HART completamente funcional con el pozo seco de temperatura. Esta opción incluye la capacidad de medir un PRT de referencia y dos canales de dispositivos en prueba que pueden medir corriente (mA), voltaje, interruptor, RTD o termopar. Además de estas funciones de medición, este calibrador cuenta con una completa capacidad de documentación para crear tareas, guardar los resultados “como se encontraron” y “como se dejaron”, así como leer, configurar y calibrar transmisores compatibles con HART. La función de “instantánea” te permite capturar toda la información mostrada en la pantalla con solo presionar un botón. Este complemento opcional permite el registro de datos de todos los canales en una función de pasos automáticos y una función de rampa. Utilizando el PRT de referencia, puedes elegir controlar el punto de ajuste del pozo seco utilizando el sensor interno o el PRT de referencia externo.

 

Autocalibración

 

Creemos que utilizar una sonda de referencia externa como estándar es la mejor manera de realizar la calibración de temperatura. Sin embargo, también reconocemos que este método no siempre es necesario o conveniente, y dependiendo de la aplicación, el uso del sensor de control interno sería preferible. Tradicionalmente, el sensor de control interno tiene una precisión amplia que puede atribuirse en gran medida a su deriva a largo plazo. Hemos incorporado una función de autocalibración que te permite realizar una calibración automatizada del sensor de control interno utilizando tu referencia externa. Con solo unas pocas selecciones, la calibración se ejecutará automáticamente, proporcionándote una calibración fresca y rastreable del sensor de control que mejorará su precisión, ya que no tendrás que tener en cuenta su deriva a largo plazo cuando se utiliza como referencia.

 

Kit de Sondas Cortas

 

El kit de calibración de sondas cortas de la serie Additel 110 está diseñado para ayudar a los usuarios de nuestro calibrador de pozo seco ADT875-155 (-40°C) a calibrar sondas de temperatura y transmisores con longitudes de sonda cortas. Este kit completo incluye todo lo necesario para realizar calibraciones más precisas y confiables para esas sondas cortas desafiantes. Puedes elegir entre nuestro kit métrico o imperial según tus necesidades.

 

BASE UNIT DRY WELL SPECIFICATIONS

SPECIFICATION  875-155              875-350              875-660

Temperature Range at 23°C         -40°C to 155°C   33°C to 350°C              33°C to 660°C

Display Accuracy             ±0.18°C at Full Range     ±0.2°C at Full Range   ±0.3°C at 33°C

±0.3°C at 420°C

±0.5°C at 660°C

Stability (30 min)             ±0.01°C at Full Range     ±0.02°C at Full Range   ±0.02°C at 33°C

±0.03°C at 50°C

±0.04°C at 420°C

±0.04°C at 660°C

Axial Uniformity at 60 mm (2.4 in)           ±0.07°C at Full Range              ±0.04°C at 33°C ±0.05°C at 33°C

±0.1°C at 200°C ±0.3°C at 420°C

±0.2°C at 350°C ±0.5°C at 660°C

Radial Uniformity            ±0.01°C at Full Range     ±0.01°C at 33°C              ±0.02°C at 33°C

±0.015°C at 200°C           ±0.05°C at 420°C

±0.02°C at 350°C             ±0.1°C at 660°C

Loading Effect    ±0.1°C (Display Sensor)  ±0.15°C (Display Sensor)              ±0.15°C (Display Sensor)

±0.02°C (External Sensor)            ±0.015°C (External Sensor)              ±0.035°C (External Sensor)

Hysteresis (Display Sensor)          0.025°C 0.03°C   0.1°C

Environmental Conditions           8°C to 38°C guaranteed accuracy

0°C to 50°C, 0% to 90% RH non-condensing, 3000 M altitude for normal operation

Storage Conditions         -20°C to 60°C

IP Rating             IP20

Immersion Depth            145 mm (5.70 in)            150 mm(5.90 in)

Insert OD            25.8 mm (1.02 in)           24.8 mm (0.98 in)

Heating Time     13 min: -40°C to 155°C   10 min: 33°C to 350°C    15 min: 33°C to 660°C

5 min: -40°C to 23°C

8 min: 23°C to 155°C

Cooling Time     28 min: 155°C to -40°C   15 min: 350°C to 100°C  23 min: 660°C to 100°C

8 min: 155°C to 23°C      10 min: 100°C to 50°C    12 min: 100°C to 50°C

20 min: 23°C to -40°C     10 min: 50°C to 33°C      12 min: 50°C to 33°C

Typical Time to Stability 10 min

Resolution         0.01°C

Units     °C, °F, and K

Display 6.5 in (165 mm) color touch screen

Size (H x W x D) 320 x 170 x 330 mm (12.6 x 6.7 x 13.0 in)

Weight  9.9 kg (21.8 lbs) 8.2 kg (18.1 lbs)

Power Requirements      90-254 VAC, 45-65 Hz, 580 W     90-254 VAC, 45-65 Hz, 1200 W

Mechanical Testing         Vibration: 2 g (10-500 Hz), 30 min for 2 sides

Impact: 4 g three times

Drop test: 500 mm (19.6 in)

Communication USB A, USB B, RJ45, WiFi, Bluetooth

Localization        English, Chinese, Japanese, Russian, German, French, Italian, and Spanish

Warranty            1 year

 

 

INPUT SPECIFICATIONS (PROCESS CALIBRATOR [PC] OPTION)

SPECIFICATION  DESCRIPTION

Readout Accuracy for 100 ohm PRT (Probe Accuracy Not Included)              ±0.009°C at -40°C

±0.010°C at 0°C

±0.012°C at 50°C

±0.017°C at 155°C

±0.019°C at 200°C

±0.026°C at 350°C

±0.030°C at 420°C

±0.042°C at 660°C

Readout Resolution        0.5 mΩ

Reference Resistance Range        0Ω to 400Ω

Reference Resistance Accuracy   0Ω to 50Ω: 0.002Ω

50Ω to 400Ω: 0.008% RD

Reference Characterizations       ITS-90, CVD, IEC-751, Resistance

Reference Measurement Capability         4-wire PRT

Reference Probe Connection      6-pin lemo smart connector

RTD Channels    2

RTD Measurement Accuracy (excl sensor) Compliance     0Ω to 25Ω: 0.002Ω

25Ω to 400Ω: 0.004% RD

400Ω to 4K Ω: 0.008% RD

RTD Measurement Resolution    0Ω to 400Ω: 1 mΩ

400Ω to 4K Ω: 0.01Ω

RTD Measurement Resistance Range       0Ω to 4KΩ

RTD Characterizations    PT10, PT25, PT50, PT100, PT200, PT500, PT1000, CU10, CU50, CU100, NI100, NI120

RTD Connection Four 4 mm input jacks

RTD Channels    2 channels. Both accept 2, 3, or 4-wire RTDs

TC Channel        2

TC Measurement Channels         Mini TC terminals: Accepting S, R, K, B, N, E, J, T, C, D, G, L, and U

TC Measurement Accuracy (excl sensor) Type K: ±0.13°C at 0°C ±0.15°C at 155°C ±0.18°C at 350°C ±0.24°C at 660°C

TC Range            –75 mV to 75 mV

TC Resolution    0.0001 mV, Input Impedance >100 MΩ

TC Voltage Accuracy       0.02% RD + 5 μV

Internal CJC Accuracy     ±0.35°C (ambient from 0°C to 50°C)

Current Range   –30 mA to 30 mA

Current Accuracy             0.02% RD + 2 μA

Current Resolution         0.0001 mA, Input Impedance: < 10Ω

Voltage Ranges –12 V to 12 V and –30 V to 30 V

Voltage Accuracy             ±0.02% RD + 2 mV

Voltage Resolution         0.001 V; Input impedance: > 1MΩ

Switch Test         Mechanical or Electrical

DC 24V Output  24V ±10%, MAX60 mA

Hart Communicator       Read, configure and calibrate HART devices – DD files updated periodically Optional – (order ADT875PC)

Documentation Up to 1,000 tasks which store up to 10 results each containing as found and as left data. Snap shot feature allows for screen captures. Records auto step and ramp functions.

Temperature Coefficient 0°C to 8°C and 38°C to 50°C        ADT875 (PC)-155: ±0.005°C/°C

ADT875 (PC)-350/660: ±0.01°C/°C

Ref Readout: ±5 ppm FS/°C

RTD Readouts: ±2 ppm FS/°C

TC Readouts: ±5 ppm FS/°C

Current: ±5 ppm FS/°C

Voltage: ±5 ppm FS/°C

 

 

TC MEASUREMENT SPECIFICATION AND CALCULATION (PROCESS CALIBRATOR [PC] OPTION)

TC TYPE TEMPERATURE (°C)         ERROR (°C)[1]

B            250        ±2

350        ±1.44

660        ±0.84

C            0            ±0.38

155        ±0.34

350        ±0.33

660        ±0.38

0            ±0.52

155        ±0.37

350        ±0.33

660        ±0.36

E            -40         ±0.09

0            ±0.09

155        ±0.1

350        ±0.13

660        ±0.19

G            0            ±3.85

155        ±0.71

350        ±0.43

660        ±0.36

J             -40         ±0.1

0            ±0.1

155        ±0.12

350        ±0.16

660        ±0.21

K            -40         ±0.13

0            ±0.13

155        ±0.16

350        ±0.19

660        ±0.25

L             -40         ±0.1

0            ±0.1

155        ±0.12

350        ±0.16

660        ±0.21

N            -40         ±0.2

0            ±0.2

155        ±0.19

350        ±0.2

660        ±0.24

R            -40         ±1.23

0            ±0.95

155        ±0.63

350        ±0.56

660        ±0.54

S            -40         ±1.16

0            ±0.93

155        ±0.65

350        ±0.6

660        ±0.6

T            -40         ±0.14

0            ±0.13

155        ±0.13

350        ±0.15

400        ±0.15

U            -40         ±0.14

0            ±0.13

155        ±0.13

350        ±0.14

600        ±0.17

[1] Excluding cold junction compensation errors.

 

 

SECONDARY PRT INFORMATION

SPECIFICATION  AM1710 SERIES AM1730 SERIES AM1751 SERIES              AM1760 SERIES

Temperature Range [3]  -60°C to 160°C   -200°C to 420°C -200°C to 670°C    -200°C to 670°C

Resistance at 0°C             Nominal 100Ω

Temperature Coefficient 0.003925 Ω / Ω / °C

Calibrated Accuracy (k=2)[2][3]  ±0.025°C at -40°C            ±0.025°C at -40°C ±0.025°C at -40°C            ±0.010°C at -196°C

±0.015°C at 0.01°C          ±0.015°C at 0.01°C          ±0.015°C at 0.01°C              ±0.006°C at 0.01°C

±0.025°C at 160°C           ±0.035°C at 420°C           ±0.035°C at 420°C              ±0.015°C at 420°C

±0.05°C at 661°C             ±0.025°C at 661°C

Drift      ±0.01°C at TPW after 100 hours at 160°C              ±0.01°C at TPW after 100 hours at 420°C     ±0.01°C at TPW after 100 hours at 661°C    ±0.004°C at TPW after 100 hours at 661°C

Short Term Stability        ±0.007°C             ±0.002°C

Thermal Shock  ±0.005°C after (10) thermal cycles from minimum to maximum temperatures          ±0.002°C after (10) thermal cycles from minimum to maximum temperatures

Hysteresis           <=0.005°C           <=0.001°C

Self-heating        50 mW/°C          0.0015°C at 0.5mA

Response Time  9 seconds for 63% response to step change in water moving at 3 feet per second

Measurement Current   0.5 mA or 1 mA

Sensor Length    32 mm  42 mm

Sensor Location 5 mm from tip

Insulation Resistance      >1000 MΩ at room temperature

Sheath Material Stainless Steel    Inconeltm

Dimension         AM1710-12-ADT             AM1730-12-ADT              AM1751-12-ADT             AM1760-12-ADT

0.25 in dia X 12 in (6.35 mm X 305 mm)  0.25 in dia X 12 in (6.35 mm X 305 mm) 0.25 in dia X 12 in (6.35 mm X 305 mm)  0.25 in dia X 12 in (6.35 mm X 305 mm)

AM1710-BEND-ADT        AM1730-BEND-ADT        AM1751-BEND-ADT       AM1760-BEND-ADT

0.25 in dia X 12 in (6.35 mm X 305 mm), 90° bend at 7.4 inch (190 mm) from probe end      0.25 in dia X 12 in (6.35 mm X 305 mm), 90° bend at 9.6 inch (245 mm) from probe end   0.25 in dia X 12 in (6.35 mm X 305 mm), 90° bend at 9.6 inch (245 mm) from probe end       0.25 in dia X 12 in (6.35 mm X 305 mm), 90° bend at 9.6 inch (245 mm) from probe end

External Leads   Teflontm –insulated copper wire, 4 leads, 0.8 meters

Handle Dimension          15 mm (OD) x 65 mm (L)

Handle Temperature Range[1]    -50°C to 160°C   -50°C to 180°C

Calibration         NIST traceable calibration with data included. Accredited calibration available per request.

[1] Handle temperatures outside this range will cause damage to the probe.

[2] Includes calibration and 100 hour drift.

[3] Probe calibration ranges may differ from probe temperature ranges (see Calibrated Accuracy for calibration ranges).

*PRT Information from www.accumac.com

 

 

REFERENCE DRY WELL SPECIFICATIONS

SPECIFICATION  878-160              878-425              878-700

Temperature Range at 23°C         -40°C to 160°C   33°C to 425°C              33°C to 700°C

Display Accuracy             ±0.1°C at Full Range       ±0.2°C at Full Range   ±0.20°C at 33°C

±0.20°C at 425°C

±0.25°C at 660°C

Stability (30 min)             ±0.005°C at Full Range   ±0.005°C at 100°C              ±0.005°C at 100°C

±0.010°C at 225°C           ±0.015°C at 425°C

±0.015°C at 425°C           ±0.030°C at 700°C

Axial Uniformity at 60 mm (2.4 in)           ±0.025°C at -40°C              ±0.10°C at 100°C             ±0.10°C at 100°C

±0.020°C at 0°C ±0.15°C at 225°C             ±0.25°C at 425°C

±0.050°C at 160°C           ±0.25°C at 425°C             ±0.40°C at 700°C

Axial Uniformity at 80 mm (3.15 in)         ±0.050°C at -40°C              ±0.15°C at 100°C             ±0.15°C at 100°C

±0.040°C at 0°C ±0.20°C at 225°C             ±0.30°C at 425°C

±0.050°C at 160°C           ±0.30°C at 425°C             ±0.60°C at 700°C

Radial Uniformity            ±0.01°C at Full Range     ±0.025°C at 100°C              ±0.025°C at 100°C

±0.030°C at 225°C           ±0.040°C at 425°C

±0.040°C at 425°C           ±0.060°C at 700°C

Loading Effect    ±0.08°C (Display Sensor)              ±0.05°C (Display Sensor) ±0.02°C at 100°C

±0.05°C at 425°C

±0.15°C at 700°C

±0.010°C (External Sensor)          ±0.01°C (External Sensor)              ±0.01°C at 100°C

±0.02°C at 425°C

±0.03°C at 700°C

Hysteresis (Display Sensor)          0.025°C 0.04°C   0.07°C

Environmental Conditions           8°C to 38°C guaranteed accuracy

0°C to 50°C, 0% to 90% RH non-condensing

Storage Conditions         -20°C to 60°C

IP Rating             IP20

Immersion Depth            160 mm (6.30 in)            193 mm (7.60 in)

Insert OD            31.9 mm (1.26 in)           30.8 mm (1.21 in)

Heating Time     4 min: -40°C to 23°C       15 min: 23°C to 425°C    25 min: 23°C to 700°C

10 min: 23°C to 160°C

Cooling Time     8 min: 160°C to 23°C      24 min: 425°C to 100°C  30 min: 700°C to 100°C

15 min: 23°C to -40°C     15 min: 100°C to 50°C    15 min: 100°C to 50°C

Typical Time to Stability 10 min

Resolution         0.001°C

Units     °C, °F, and K

Display 6.5 in (165 mm) color touch screen

Size (H x W x D) 170 x 345 x 330 mm (6.69 x 13.58 x 13.0 in)

Weight  11.2 kg (24.7 lbs)             9.7 kg (21.4 lbs)

Power Requirements      90-254 VAC, 45-65 Hz, 580 W     90-25 VAC, 45-65 Hz, 1400 W

Communication USB A, USB B, RJ45, WiFi, Bluetooth

Localization        English, Chinese, Japanese, Russian, German, French, Italian, and Spanish

Warranty            1 year

 

 

INPUT SPECIFICATIONS (PROCESS CALIBRATOR [PC] OPTION)

SPECIFICATION  DESCRIPTION

Readout Accuracy for 100 ohm PRT (Probe Accuracy Not Included)              ±0.005°C at -40°C

±0.006°C at 0°C

±0.008°C at 50°C

±0.009°C at 100°C

±0.011°C at 160°C

±0.015°C at 300°C

±0.019°C at 425°C

±0.026°C at 660°C

±0.028°C at 700°C

Readout Resolution        0.1 mΩ

Reference Resistance Temperature Measurement Range -200°C to 926°C

Reference Resistance Accuracy   0Ω to 50Ω: ±1.25mΩ

50Ω to 400Ω: ±0.0025% RD

Reference Characterizations       ITS-90, CVD, IEC-751

Reference Measurement Capability         4-wire PRT

Reference Probe Connection      6-pin lemo smart connector and Quick-Push connectors to accept banana, mini-banana, large & small spade lug and bare wire connections

RTD Channels    2 channels. Both accept 2, 3, or 4-wire RTDs

RTD Measurement Accuracy (excl sensor)            0Ω – 25Ω: ±0.002Ω

25Ω – 400Ω: 0.004% RD

400Ω – 4kΩ: 0.005% RD

RTD Measurement Resolution    0.1mΩ

RTD Measurement Resistance Range       0Ω to 4KΩ

RTD Characterizations    PT10, PT25, PT50, PT100, PT200, PT500, PT1000, CU10, CU50, CU100, NI100, NI120

RTD Connection Quick-Push connectors accept banana, mini-banana, large & small spade lug and bare wire connections.

TC Channel        2

TC Measurement Channels         Accepting S, R, K, B, N, E, J, T, C, D, G, L, and U

TC Range            -75 mV to 75 mV

TC Resolution    0.1µV

TC Voltage Accuracy       0.01% RD + 5 µV

Internal CJC Accuracy     ±0.2°C (ambient from 0°C to 50°C)

Current Range   -30 mA to 30 mA

Current Accuracy             0.01% RD + 2 µA

Current Resolution         0.1 µA, Input Impedance: < 10Ω

Voltage Range   -12 V to 12 V and –30 V to 30 V

Voltage Accuracy             ±0.01% RD + 0.6 mV

Voltage Resolution         0.1 mV; Input impedance: >1MΩ

Switch Test         Mechanical or Electrical

DC 24V Output  24 V ±0.5 V, MAX 60 mA

Hart Communicator       Read, configure and calibrate HART devices – DD files updated periodically. Optional – (order ADT875PC)

Documentation Up to 1,000 tasks which store up to 10 results each containing as found and as left data. Snap shot feature allows for screen captures. Records auto step and ramp functions.

Temperature Coefficient (0°C to 13°C and 33°C to 50°C)   ADT878 (PC)-160: ±0.005°C/°C

ADT878 (PC)-425/700: ±0.005°C/°C

Ref Readout: ±1 ppm FS/°C

RTD Readouts: ±1 ppm FS/°C

TC Readouts: ±5 ppm FS/°C

Current: ±5 ppm FS/°C

Voltage: ±5 ppm FS/°C

 

 

TC MEASUREMENT SPECIFICATION AND CALCULATION (PROCESS CALIBRATOR [PC] OPTION)

TC TYPE TEMPERATURE (°C)         ERROR (°C)[1]

B            250        ±1.99

300        ±1.65

425        ±1.18

660        ±0.81

700        ±0.77

1768      ±0.56

K            -200      ±0.29

-40         ±0.13

0            ±0.13

160        ±0.14

300        ±0.15

425        ±0.16

660        ±0.18

700        ±0.19

1000      ±0.31

E            -200      ±0.16

-40         ±0.09

0            ±0.09

160        ±0.08

300        ±0.09

425        ±0.10

660        ±0.12

700        ±0.13

1000      ±0.17

J             -210      ±0.22

-40         ±0.10

0            ±0.10

160        ±0.11

300        ±0.12

425        ±0.13

660        ±0.14

700        ±0.14

1000      ±0.21

T            -200      ±0.28

-40         ±0.14

0            ±0.13

160        ±0.11

300        ±0.11

400        ±0.11

N            -200      ±0.46

-40         ±0.20

0            ±0.19

160        ±0.17

300        ±0.17

425        ±0.17

660        ±0.19

700        ±0.19

1000      ±0.27

S            -50         ±1.25

-40         ±1.17

0            ±0.93

160        ±0.63

300        ±0.57

425        ±0.55

660        ±0.54

700        ±0.53

1768      ±0.66

R            -50         ±1.33

-40         ±1.23

0            ±0.95

160        ±0.61

300        ±0.54

425        ±0.51

660        ±0.48

700        ±0.48

1768      ±0.58

[1] Excluding cold junction compensation errors.

 

 

SECONDARY PRT INFORMATION

SPECIFICATION  AM1710 SERIES AM1730 SERIES AM1751 SERIES              AM1760 SERIES

Temperature Range [3]  -60°C to 160°C   -200°C to 420°C -200°C to 670°C    -200°C to 670°C

Resistance at 0°C             Nominal 100Ω

Temperature Coefficient 0.003925 Ω / Ω / °C

Calibrated Accuracy (k=2)[2][3]  ±0.025°C at -40°C            ±0.025°C at -40°C ±0.025°C at -40°C            ±0.010°C at -196°C

±0.015°C at 0.01°C          ±0.015°C at 0.01°C          ±0.015°C at 0.01°C              ±0.006°C at 0.01°C

±0.025°C at 160°C           ±0.035°C at 420°C           ±0.035°C at 420°C              ±0.015°C at 420°C

±0.05°C at 661°C             ±0.025°C at 661°C

Drift      ±0.01°C at TPW after 100 hours at 160°C              ±0.01°C at TPW after 100 hours at 420°C     ±0.01°C at TPW after 100 hours at 661°C    ±0.004°C at TPW after 100 hours at 661°C

Short Term Stability        ±0.007°C             ±0.002°C

Thermal Shock  ±0.005°C after (10) thermal cycles from minimum to maximum temperatures          ±0.002°C after (10) thermal cycles from minimum to maximum temperatures

Hysteresis           <=0.005°C           <=0.001°C

Self-heating        50 mW/°C          0.0015°C at 0.5mA

Response Time  9 seconds for 63% response to step change in water moving at 3 feet per second

Measurement Current   0.5 mA or 1 mA

Sensor Length    32 mm  42 mm

Sensor Location 5 mm from tip

Insulation Resistance      >1000 MΩ at room temperature

Sheath Material Stainless Steel    Inconeltm

Dimension         AM1710-12-ADT             AM1730-12-ADT              AM1751-12-ADT             AM1760-12-ADT

0.25 in dia X 12 in (6.35 mm X 305 mm)  0.25 in dia X 12 in (6.35 mm X 305 mm) 0.25 in dia X 12 in (6.35 mm X 305 mm)  0.25 in dia X 12 in (6.35 mm X 305 mm)

AM1710-BEND-ADT        AM1730-BEND-ADT        AM1751-BEND-ADT       AM1760-BEND-ADT

0.25 in dia X 12 in (6.35 mm X 305 mm), 90° bend at 7.4 inch (190 mm) from probe end      0.25 in dia X 12 in (6.35 mm X 305 mm), 90° bend at 9.6 inch (245 mm) from probe end   0.25 in dia X 12 in (6.35 mm X 305 mm), 90° bend at 9.6 inch (245 mm) from probe end       0.25 in dia X 12 in (6.35 mm X 305 mm), 90° bend at 9.6 inch (245 mm) from probe end

External Leads   Teflontm –insulated copper wire, 4 leads, 0.8 meters

Handle Dimension          15 mm (OD) x 65 mm (L)

Handle Temperature Range[1]    -50°C to 160°C   -50°C to 180°C

Calibration         NIST traceable calibration with data included. Accredited calibration available per request.

[1] Handle temperatures outside this range will cause damage to the probe.

[2] Includes calibration and 100 hour drift.

[3] Probe calibration ranges may differ from probe temperature ranges (see Calibrated Accuracy for calibration ranges).

*PRT Information from www.accumac.com

 

 

SPECIFICATIONS

SPECIFICATION  DISPLAY

Uncertainty        <0.0005°C [1]

Immersion depth/ID       115 mm X 8 mm

External Dimensions      160 mm X 25 mm

Cell material      Borosilicate Glass

Realization time 20 mins

Estimated working time 2 hours

Recommended thermal Fluid      Ethanol

Warranty            1 year

 

 

TRIPLE POINT OF WATER SPECIFICATIONS

SPECIFICATION  DISPLAY

Uncertainty        <0.0005°C [1]

Immersion depth/ID       115 mm X 8 mm

External Dimensions      160 mm X 25 mm

Cell material      Borosilicate Glass

Realization time 20 mins

Estimated working time 2 hours

Recommended thermal Fluid      Ethanol

Warranty            1 year