DESCRIPCIÓN
RESISTANCE RTD SIMULATOR
- Accuracy 0.1%+25 mΩ (± 0.32 ºC at 0ºC for PT 100)
- Range up to 10 kΩ
- Uses Real Resistors
- Calibration Included
DESCRIPTION
IET LABS RS-RTD RESISTANCE RTD SIMULATOR
- Direct reading – No fumbling with multiple slide or rotary switches
The IET family of digital substituters uses convenient side-by-side thumbwheel switches. Simply dial in the desired values and use.
Ranges are separated by color-coded switches and numbers.
- Broad Choice of standard and optional models
A full line of standard substituters satisfies most requirements
RS SERIES RESISTANCE SUBSTITUTION BOX
The RS-RTD is a economical, indispensable, portable RTD Simulator.
With a wide continuous range of 0.01 Ω – 10 kΩ, you can source out any temperature value on the RS-RTD with a 0.025 ºC resolution.
The RS-RTD uses actual resistors. Many competitive RTD calibrators are mistakenly designed for currents flowing in only one direction through the device; they are not bipolar or bi-directional with respect to current.
Another feature of the RS-RTD is that it uses convenient side by side, color coded, thumbwheel switches that allow for direct reading — There is no fumbling with multiple slide or rotary switches. Simply dial in the desired values and use!
Made of high impact plastic and weighing less than a pound, these RTD Simulators are very portable and can reduce clutter on a busy lab bench.
MANUFACTURER SPECS
| Model |
RS-200 |
RS-201 |
RS-200W |
RS-201W |
RS-200-2W |
RS-201W-2W |
RS-RTD |
| Type: |
Resistance |
Precision Resistance |
Wide-Range Resistance |
Wide-Range Precision Resistance |
High Power Resistance |
High-Power / Wide-Range Precision Resistance |
RTD Simulator |
| Accuracy: |
±(1%+25 mΩ) |
±(0.1%+25 mΩ)* |
±(1%+36 mΩ) |
±(0.1%+36 mΩ)* |
±(1%+25 mΩ) |
±(0.1%+36 mΩ)* |
±(0.1%+25 mΩ) |
| Decades: |
7 |
7 |
9 |
9 |
7 |
9 |
6 |
| Range: |
0 – 9,999,999 Ω |
0 – 99,999,999.9 Ω |
0 – 9,999,999 Ω |
0 – 99,999,999.9 Ω |
0 – 9,999.99 Ω |
| Resolution: |
1 Ω |
0.1 Ω |
1 Ω |
0.1 Ω |
0.01 Ω |
| Ratings: |
0.5 W (rising to 2.5 W at step 9) |
2 W (rising to 10 W at step 9) |
0.5 W (rising to 2.5 W at step 9) |
| Residual: |
≤0.39 Ω (≤0.056 Ω/decade) |
≤0.5 Ω (≤0.056 Ω/decade) |
≤0.39 Ω |
≤0.5 Ω |
≤0.34 Ω |
| Components: |
Metal film resistors; Manganin wire ≤ 0.9 Ω |
| Physical: |
A |
B |
A |
B |
A |
| A |
8.1 x 7.9 x 5.6 cm; 184 g (3.2 x 3.1 x 2.2 in; 6.5 oz.) |
| B |
12 x 7.9 x 5.6 cm; 235 g(4.7 x 3.1 x 2.2 in; 8.3 oz) |
| C |
18.8 x 11 x 6 cm, 410 g (7.4 x 4.3 x 2.4 in, 14 oz) |
| *Accuracy: After subtraction of residual impedance: traceable to SI. For 0.1% models accuracy is ±(0.2%) for ≥ 10 MΩ |
RS SERIES RESISTANCE SUBSTITUTION BOX
The RS Series Resistance Substitution Box is the most commonly used decade box on the market today. The RS Series is not only easier to use, but it is also priced lower than most its competition.
The easy of use and 0.1% accuracy makes the RS Box ideal for daily verification of test equipment before measurements, troubleshooting in the field or on the factory floor.
One nice feature of the RS Series is that it uses convenient side by side, color coded, thumbwheel switches allowing for direct reading — There is no fumbling with multiple slide or rotary switches. Simply dial in the desired values and use!
Made of high impact plastic and weighing less then a pound, these substituters are very portable and can reduce clutter on a busy lab bench.
MANUALS/GUIDES
Spec Sheets
- IET Labs RS-CS-LS Series Data Sheet
MANUFACTURER SPECS
| Model |
RS-200 |
RS-201 |
RS-200W |
RS-201W |
RS-200-2W |
RS-201W-2W |
RS-RTD |
| Type: |
Resistance |
Precision Resistance |
Wide-Range Resistance |
Wide-Range Precision Resistance |
High Power Resistance |
High-Power / Wide-Range Precision Resistance |
RTD Simulator |
| Accuracy: |
±(1%+25 mΩ) |
±(0.1%+25 mΩ)* |
±(1%+36 mΩ) |
±(0.1%+36 mΩ)* |
±(1%+25 mΩ) |
±(0.1%+36 mΩ)* |
±(0.1%+25 mΩ) |
| Decades: |
7 |
7 |
9 |
9 |
7 |
9 |
6 |
| Range: |
0 – 9,999,999 Ω |
0 – 99,999,999.9 Ω |
0 – 9,999,999 Ω |
0 – 99,999,999.9 Ω |
0 – 9,999.99 Ω |
| Resolution: |
1 Ω |
0.1 Ω |
1 Ω |
0.1 Ω |
0.01 Ω |
| Ratings: |
0.5 W (rising to 2.5 W at step 9) |
2 W (rising to 10 W at step 9) |
0.5 W (rising to 2.5 W at step 9) |
| Residual: |
≤0.39 Ω (≤0.056 Ω/decade) |
≤0.5 Ω (≤0.056 Ω/decade) |
≤0.39 Ω |
≤0.5 Ω |
≤0.34 Ω |
| Components: |
Metal film resistors; Manganin wire ≤ 0.9 Ω |
| Physical: |
A |
B |
A |
B |
A |
| A |
8.1 x 7.9 x 5.6 cm; 184 g (3.2 x 3.1 x 2.2 in; 6.5 oz.) |
| B |
12 x 7.9 x 5.6 cm; 235 g(4.7 x 3.1 x 2.2 in; 8.3 oz) |
| C |
18.8 x 11 x 6 cm, 410 g (7.4 x 4.3 x 2.4 in, 14 oz) |
| *Accuracy: After subtraction of residual impedance: traceable to SI. For 0.1% models accuracy is ±(0.2%) for ≥ 10 MΩ |
TECH SPECS
Decade Boxes/Resistance Decade Box / Precision Resistance Template
|
| Minimum Resistance (decade box) |
1 Ohms |
| Maximum Resistance (decade box) |
999999 Ohms (999999000 m Ohms) |
| # Decades/Steps/Range |
7 |
| Accuracy |
±(1%+25 mO) |
| Max Resolution (Ohms) |
1 Ohms (1000 m Ohms) |
| Programmable |
No |
Test Equipment General Attributes
|
| Warranty |
12 MONTHS (1 YEARS) |
| Product Weight |
1 LBS |
| Product Height |
2.2 IN |
| Product Length |
3.2 IN |
| Product Width |
3.1 IN |
| Data Logging |
No |
| HTS/Schedule B Number |
9030.33.0040 |
| Shipping Height |
4.25 IN |
| Shipping Length |
7.25 IN |
| Shipping Width |
4.50 IN |
